Warning: Last items in stock!
MOST BRONZING TANNING TUBE OF THE NEW 0.3 REGULATION
Sunbeds from April 2009 will be effected by EU regulations in the United Kingdom on all installations
The regulation covers the whole of Europe ( EN number 60335-2-27 ) All sunbeds installed from April 1st 2009 must comply to the new output limit of sunbeds to 0.3W/m2 erythemally weighted ( the burning rays)
No dates were set for older equipment to comply. However, all electrical equipment must comply to the “General Product Safety Regulations 2005” and this regulation is being sited to define if equipment is “Safe”. If Sun tanning equipment being offered is not 0.3 compliant then it could be define as “unsafe” and therefore will need to be modified so as to comply.
The output of tanning equipment will be comparable to the a natural mid-day tropical sun so that the new generation of tanning lamps used in sunbeds will provide a higher UVA content ( the tanning ray ).
This will result in tanning customers getting a deeper tan that will be long-lasting, safer and gentler to their skin.
Summary Facts :
Tanning effect will be equal to a Mediterranean mid-day sun
Deeper and longer lasting tan
Very reduced burning effect
Sunbeds will be Safer to use and better for your health
More customer potential and confidence in tanning